Zeitproblem ??

[Juergen]

im log steht :

[16:14:33.555][W][component:579]: display took a long time for an operation (246 ms)
[16:14:33.562][W][component:582]: Components should block for at most 30 ms
[16:14:33.796][W][component:579]: logger took a long time for an operation (491 ms)
[16:14:33.798][W][component:582]: Components should block for at most 30 ms
[16:15:32.207][I][safe_mode:071]: Boot seems successful; resetting boot loop counter

ist das normal ?

der Code:

captive_portal:

i2c:
  - id: links
    sda: 8
    scl: 9
    scan: true
  #  frequency: 100khz
 
  # Geändert auf 5 & 6, um die Strapping-Warnung zu vermeiden
  - id: rechts
    sda: 10
    scl: 11
    scan: true
  #  frequency: 100khz

font:
  - file: "gfonts://Roboto"
    id: big_font
    size: 25
  - file: "gfonts://Roboto"
    id: small_font
    size: 14
  - file: "gfonts://Roboto"
    id: gros_font
    size: 45
sensor:
  - platform: homeassistant
    id: inverter_power
    entity_id: sensor.inverter_eingangsleistung
    internal: true
    filters:
      - sliding_window_moving_average:
          window_size: 5
          send_every: 1
    on_value:
      then:
        - component.update: display_links

  - platform: homeassistant
    id: battery_charge
    entity_id: sensor.batteries_batterieladung
    internal: true
    filters:
      - sliding_window_moving_average:
          window_size: 5
          send_every: 1
    on_value:
      then:
        - component.update: display_rechts

display:
  - platform: ssd1306_i2c
    model: "SH1106 128x64"
    id: display_links
    i2c_id: links
    address: 0x3C
    update_interval: 30ms
    lambda: |-
      if (id(api_client).is_connected() && id(inverter_power).has_state()) {
        if (id(inverter_power).state >= 10.0) {
          float kw_val = id(inverter_power).state / 1000.0;
          it.printf(64, 32, id(big_font), TextAlign::CENTER, "%.3f kW", kw_val);
        } else {
          // PING-PONG SCROLLING (Exakt auf 35px Textbreite optimiert)
          static int x_pos = 64;
          static int direction = 2;
          
          x_pos += direction;

          // Umkehrpunkte: Textmitte bei 18 (ganz links) und 110 (ganz rechts)
          if (x_pos >= 80 || x_pos <= 48) {
            direction *= -1;
          }
          
          it.print(x_pos, 32, id(big_font), TextAlign::CENTER, "0,000kW");
        }
      } else {
        it.fill(COLOR_OFF);
      }

  - platform: ssd1306_i2c
    model: "SH1106 128x64"
    id: display_rechts
    i2c_id: rechts
    address: 0x3C
    update_interval: 30ms
    lambda: |-
      if (id(api_client).is_connected() && id(battery_charge).has_state()) {
        float charge = id(battery_charge).state;
        
        // Logik für LEER (<= 20%) und VOLL (>= 100%)
        if (charge <= 20.0 || charge >= 100.0) {
          static int x_pos_r = 64;
          static int dir_r = 2;
          x_pos_r += dir_r;
          
          // Wendepunkte für "LEER" / "VOLL" (ca. 35-45px breit)
          if (x_pos_r >= 90 || x_pos_r <= 38) dir_r *= -1;
          
          const char* text = (charge >= 100.0) ? "VOLL" : "LEER";
          it.print(x_pos_r, 32, id(big_font), TextAlign::CENTER, text);
          
        } else {
          // Normalanzeige der Prozentzahl (statisch mittig)
          it.printf(64, 32, id(gros_font), TextAlign::CENTER, "%.0f%%", charge);
        }
      } else {
        it.fill(COLOR_OFF);
      }

 

[Juergen]

so problem etwas gemindert Tackt des i2c auf 400khz und datenmengen reduziert