Growatt MOD6000TL3-HU mit Speicher in Home Assistant eingebunden

[Boogie2005]

Hi Leute, ich habe zu Hause Home Assistant laufen für so einige Sachen im Hause. Da ich nun auch ein PV Anlage habe, wollte ich diese auch da drin haben. Nun nach 2 Wochen basteln habe ich es geschafft, sie ist nun von der Cloud befreit, und in HA integriert.
Jetzt mal die Daten dazu:
Growatt MOD6000TL3-HU Wechselrichter, dazu APX 10.0 10KW Speicher, Shine-x Stick zum Auslesen. Den Stick habe ich mit ESP Home geflasht, das Board ist ein ESP 8266 ESP07S.
Muss zugeben, dass ich das Energie Dashboard unter Zuhilfenahme der Ki erstellt habe, hat aber auch etwas gedauert.

Daher stelle ich hier für alle, die auch den gleichen WR haben meine YAML Datei zur Verfügung, macht es ja für alle leichter.

 

[-Seth-]

Guten Tag,
den zum download verfügbaren YAML Teil (als .txt-DAtei) habe ich eben entfernt. Du kannst das auch direkt hier einstellen (wie? Schau hier: https://forum.heimnetz.de/threads/hinweis-zum-thema-einfuegen-von-yaml-code-in-beitraegen.1019/).
Das macht es allen leichter und nicht jede*r mag "irgendwas" runterladen...
Also: einfach wie im Link beschrieben den Code hier zeigen.
Danke.

 

[Boogie2005]

OK, dann füge ich das hier nochmal ein, alles klar, danke

esphome:
  name: growatt
  friendly_name: growatt

esp8266:
  board: esp07s

# Enable logging
logger:
  baud_rate: 0

# Enable Home Assistant API
api:
  encryption:
    key: "eure api eintragen"

ota:
  - platform: esphome
    password: "euer PW rein"

wifi:
  ssid: "Euer WLAN"
  password: "WLAN Passwort"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Growatt Fallback Hotspot"
    password: "Passwort"

captive_portal:
substitutions:
  device_description: Growatt Inverter
  friendly_name:  Growatt Inverter
  name: Growatt
 
uart:
  id: mod_bus
  tx_pin: 1
  rx_pin: 3
  baud_rate: 115200
 
modbus:
  id: modbus1
  uart_id: mod_bus
 
modbus_controller:
  - id: growatt
# the Modbus device addr
    address: 0x1
    modbus_id: modbus1
    setup_priority: -10
    update_interval: 10s 

sensor:
  - platform: modbus_controller
    name: "${friendly_name} DcPower"
    address: 5
    register_type: "read"
    unit_of_measurement: W
    device_class: power
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
        
  - platform: modbus_controller
    name: "${friendly_name} DcVoltage"
    address: 3
    register_type: "read"
    unit_of_measurement: V
    device_class: voltage
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${friendly_name} DcInputCurrent"
    address: 4
    register_type: "read"
    unit_of_measurement: A
    device_class: current
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${friendly_name} AcFrequency"
    address: 37
    register_type: "read"
    unit_of_measurement: Hz
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.01
 
  - platform: modbus_controller
    name: "${friendly_name} AcVoltage"
    address: 38
    register_type: "read"
    unit_of_measurement: V
    device_class: voltage
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
 
  - platform: modbus_controller
    name: "${friendly_name} AcOutputCurrent"
    address: 39
    register_type: "read"
    unit_of_measurement: A
    device_class: current
    icon: mdi:flash
    value_type: U_WORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${friendly_name} AcPower"
    address: 40
    register_type: "read"
    unit_of_measurement: W
    device_class: power
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${friendly_name} EnergyToday"
    address: 53
    register_type: "read"
    unit_of_measurement: kWh
    device_class: energy
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1
    
  - platform: modbus_controller
    name: "${friendly_name} EnergyTotal"
    address: 55
    register_type: "read"
    unit_of_measurement: kWh
    state_class: total_increasing
    device_class: energy
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1

    
  - platform: modbus_controller
    name: "${name} Battery SoC"
    address: 3171
    register_type: read
    unit_of_measurement: "%"
    device_class: battery
    state_class: measurement
    icon: mdi:battery
    value_type: U_WORD
    accuracy_decimals: 0


  - platform: modbus_controller
    name: "${friendly_name} battery discharge power"
    address: 3178
    register_type: "read"
    unit_of_measurement: W
    device_class: power
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1

  - platform: modbus_controller
    name: "${friendly_name} battery charge power"
    address: 3180
    register_type: "read"
    unit_of_measurement: W
    device_class: power
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1

  - platform: modbus_controller
    name: "${friendly_name} battery discharge total energy"
    address: 3182
    register_type: "read"
    unit_of_measurement: kWh
    device_class: energy
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1

  - platform: modbus_controller
    name: "${friendly_name} battery charge total energy"
    address: 3184
    register_type: "read"
    unit_of_measurement: kWh
    device_class: energy
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
    - multiply: 0.1

  - platform: modbus_controller
    name: "${friendly_name} energy to grid today"
    address: 3071
    register_type: "read"
    unit_of_measurement: kWh
    device_class: energy
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1

  - platform: modbus_controller
    name: "${friendly_name} energy to grid total"
    address: 3073
    register_type: "read"
    unit_of_measurement: kWh
    device_class: energy
    icon: mdi:flash
    value_type: U_DWORD
    accuracy_decimals: 1
    filters:
      - multiply: 0.1