Samba Backup noch HA Start automatisch starten

Sorry habe auf die schnelle in der Suche nix gefunden.

Ich habe Samba Backup installiert und am laufen.

Es funktioniert soweit auch alles.

Allerdings muss ich das AddOnn nach jedem Home Assistant Neustart manuell neu starten.

Gibt es da eine Möglichkeit das es wie bei den anderen automatisch geht?
Habe ich was übersehen?

Screenshot 2023-04-08 174243.jpg
 
Allerdings muss ich das AddOnn nach jedem Home Assistant Neustart manuell neu starten.
Das ist aber seltsam! Hier startet es seit der Installation immer automatisch.
Dazu habe ich nur das dort ausgewählt sagt mir mein iPad:
IMG_0296.jpegEs sieht also aus wie bei Dir.

Du könntest einmal in das Core oder Supervisor Log sehen, ob dort etwas steht, warum das Add-On nicht gestartet werden kann.
 
Komisch. :unsure:
Glaub ich stell mich wieder zu blöd an.
Gerade mal neu gestartet und jetzt wurde es automatisch mit gestartet.
Mir ist es eigentlich nur aufgefallen weil er mir im Dashboard immer angezeigt hat das die Entität nicht verfügbar ist.Screenshot 2023-04-08 193437.jpg
Hier im Bild ist es aktiviert.

Im Supervisor steht nur das drin. Alles andere ist grün und scheint in Ordnung zu sein.
Screenshot 2023-04-08 193532.jpg
 
Mir ist es eigentlich nur aufgefallen weil er mir im Dashboard immer angezeigt hat das die Entität nicht verfügbar ist.
Der Status Idle ist richtig, da es momentan ja nicht sichert!
Es gibt einen Sensor, den man nach einem Neustart richtig setzen muss:
IMG_8326.jpeg
Dann noch das hier in die lovelace.yaml, dann hat man alle Informationen:

YAML:
  cards:
      - type: entities
        title: Samba Backup
        entities:
          - entity: sensor.samba_backup
            icon: mdi:file-replace-outline
            name: Backup Status
          - attribute: backups_local
            entity: sensor.samba_backup
            icon: mdi:file-outline
            name: Lokale Backups
            type: attribute
          - attribute: backups_remote
            entity: sensor.samba_backup
            icon: mdi:file-move-outline
            name: Remote Backups
            type: attribute
          - attribute: total_backups_succeeded
            entity: sensor.samba_backup
            icon: mdi:file-check-outline
            name: Erfolgreiche Backups
            type: attribute
          - attribute: total_backups_failed
            entity: sensor.samba_backup
            icon: mdi:file-cancel-outline
            name: Fehlgeschlagene Backups
            type: attribute
          - attribute: last_backup
            entity: sensor.samba_backup
            icon: mdi:file-clock-outline
            name: Letztes Backup
            type: attribute
        show_header_toggle: false

IMG_0297.jpeg
 
Zuletzt bearbeitet von einem Moderator:
Es gibt einen Sensor, den man nach einem Neustart richtig setzen muss:
Anhang anzeigen 3591
Dann noch das hier in die lovelace.yaml, dann hat man alle Informationen:

YAML:
  cards:
      - type: entities
        title: Samba Backup
        entities:
          - entity: sensor.samba_backup
            icon: mdi:file-replace-outline
            name: Backup Status
          - attribute: backups_local
            entity: sensor.samba_backup
            icon: mdi:file-outline
            name: Lokale Backups
            type: attribute
          - attribute: backups_remote
            entity: sensor.samba_backup
            icon: mdi:file-move-outline
            name: Remote Backups
            type: attribute
          - attribute: total_backups_succeeded
            entity: sensor.samba_backup
            icon: mdi:file-check-outline
            name: Erfolgreiche Backups
            type: attribute
          - attribute: total_backups_failed
            entity: sensor.samba_backup
            icon: mdi:file-cancel-outline
            name: Fehlgeschlagene Backups
            type: attribute
          - attribute: last_backup
            entity: sensor.samba_backup
            icon: mdi:file-clock-outline
            name: Letztes Backup
            type: attribute
        show_header_toggle: false

Anhang anzeigen 3592
Oh super Danke. (y)
Das werde ich morgen gleich mal in Angriff nehmen.
 
Ich habe das über node red flow. Den flow gibts im internet. Das läuft auch sehr gut. Auch da wird automatisch ein merker neu gesetzt oder so. Bei mir wird jeden tag ein backup gezzogen, auf nas fritzbox usb. Das ist auf 5 oder 7 files eingebremst. Läuft alles sehr stabil.
 
Ich nutze seit ein paar Tagen Samba Backup. Alles ok, nur mir fällt auf, dass jeden Tag die Sicherungsdatei größer wird. Ist das normal?
1689788124745.png
 
Dann noch das hier in die lovelace.yaml, dann hat man alle Informationen:
Ich habe da eine Nachfrage:
Ich finde die bei dir im Bild gezeigten Infos nicht.
Bei mir sieht es so aus:
1689788877154.png
Die für mich unwichtigen Werte habe ich ausgeblendet:
1689789041790.png
Ich finde die lovelace.yaml nicht, obwohl ich die flowercardplus verwende, da sollte lovelace ja Bedingung sein?
 

Zurzeit aktive Besucher

Letzte Anleitungen

Statistik des Forums

Themen
4.383
Beiträge
45.256
Mitglieder
3.984
Neuestes Mitglied
Blitzkriegbob90
Zurück
Oben