Home Assistant Green: Zigbee2MQTT funktioniert nicht

[BobbyBlixberg]

Hallo,
der Mosquitto broker läuft, allerdings bekomme ich Zigbee2MQTT nicht zum Laufen - aus dem Protokoll:

[16:48:07] INFO: Preparing to start...
[16:48:07] INFO: Socat not enabled
[16:48:08] INFO: Starting Zigbee2MQTT...
Starting Zigbee2MQTT without watchdog.
[2025-04-24 16:48:13] info:     z2m: Logging to console, file (filename: log.log)
[2025-04-24 16:48:13] info:     z2m: Starting Zigbee2MQTT version 2.2.1 (commit #unknown)
[2025-04-24 16:48:13] info:     z2m: Starting zigbee-herdsman (3.4.11)
[2025-04-24 16:48:13] info:     zh:adapter:discovery: Matched adapter: {"path":"/dev/ttyUSB0","manufacturer":"Nabu Casa","serialNumber":"560b9bbe6a39ef11b1005df454516304","pnpId":"usb-Nabu_Casa_Home_Assistant_Connect_ZBT-1_560b9bbe6a39ef11b1005df454516304-if00-port0","vendorId":"10c4","productId":"ea60"} => ember: 2
[2025-04-24 16:48:14] info:     zh:ember: Using default stack config.
[2025-04-24 16:48:14] info:     zh:ember: ======== Ember Adapter Starting ========
[2025-04-24 16:48:14] info:     zh:ember:ezsp: ======== EZSP starting ========
[2025-04-24 16:48:14] info:     zh:ember:uart:ash: ======== ASH Adapter reset ========
[2025-04-24 16:48:14] info:     zh:ember:uart:ash: RTS/CTS config is off, enabling software flow control.
[2025-04-24 16:48:14] info:     zh:ember:uart:ash: ASH COUNTERS since last clear:
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Total frames: RX=0, TX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Cancelled   : RX=0, TX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   DATA frames : RX=0, TX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   DATA bytes  : RX=0, TX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Retry frames: RX=0, TX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   ACK frames  : RX=0, TX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   NAK frames  : RX=0, TX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   nRdy frames : RX=0, TX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   CRC errors      : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Comm errors     : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Length < minimum: RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Length > maximum: RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Bad controls    : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Bad lengths     : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Bad ACK numbers : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Out of buffers  : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Retry dupes     : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   Out of sequence : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash:   ACK timeouts    : RX=0
[2025-04-24 16:48:14] info:     zh:ember:uart:ash: ======== ASH stopped ========
[2025-04-24 16:48:14] error:     zh:ember:uart:ash: Failed to init port with error Error: Error Resource temporarily unavailable Cannot lock port
[2025-04-24 16:48:14] error:     z2m: Error while starting zigbee-herdsman
[2025-04-24 16:48:14] error:     z2m: Failed to start zigbee-herdsman
[2025-04-24 16:48:14] error:     z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible solutions
[2025-04-24 16:48:14] error:     z2m: Exiting...
[2025-04-24 16:48:14] error:     z2m: Error: Failed to start EZSP layer with status=HOST_FATAL_ERROR.
    at EmberAdapter.initEzsp (/app/node_modules/.pnpm/zigbee-herdsman@3.4.11/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:672:19)
    at EmberAdapter.start (/app/node_modules/.pnpm/zigbee-herdsman@3.4.11/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:1538:24)
    at Controller.start (/app/node_modules/.pnpm/zigbee-herdsman@3.4.11/node_modules/zigbee-herdsman/src/controller/controller.ts:136:29)
    at Zigbee.start (/app/lib/zigbee.ts:69:27)
    at Controller.start (/app/lib/controller.ts:104:13)
    at start (/app/index.js:149:5)

Auf der Seite https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html habe ich dazu nichts gefunden.

Bin für jeden Tipp dankbar.

 

[blurrrr]

Hi,

hast Du evtl. ein bisschen rumgetestet und diverses installiert? Bin zwar nicht so im Thema, aber diese Meldung...

[2025-04-24 16:48:14] error: zh:ember:uart:ash: Failed to init port with error Error: Error Resource temporarily unavailable Cannot lock port

... sieht für mich so aus, als "könnte" (nicht muss) das ganze derzeit noch anderweitig in Benutzung sein. Ist aber auch nur eine grobe Vermutung und muss auch garnicht so sein, von daher also nur eine Idee von jemandem, der damit nix zu tun hat