HA über Virtualbox auf Laptop

[friedl]

Nach einem Runterfahren findet der Dongle sich unter Hardware -

aber sonst das alte Problem wie schon bei der Virtualbox auf Windows:




SONOFF_SONOFF_Dongle_Plus_MG24_089d7f0bb29aef118c6cb69061ce3355-if00-port0","vendorId":"10c4","productId":"ea60"} => ember: 4
[2026-03-20 18:34:22] info: zh:ember: Using default stack config.
[2026-03-20 18:34:22] info: zh:ember: ======== Ember Adapter Starting ========
[2026-03-20 18:34:22] info: zh:ember:ezsp: ======== EZSP starting ========
[2026-03-20 18:34:22] info: zh:ember:uart:ash: ======== ASH Adapter reset ========
[2026-03-20 18:34:22] info: zh:ember:uart:ash: RTS/CTS config is off, enabling software flow control.
[2026-03-20 18:34:22] info: zh:ember:uart:ash: Serial port opened
[2026-03-20 18:34:22] info: zh:ember:uart:ash: ======== ASH starting ========
[2026-03-20 18:34:27] info: zh:ember:uart:ash: ======== ASH Adapter reset ========
[2026-03-20 18:34:27] info: zh:ember:uart:ash: ======== ASH starting ========
[2026-03-20 18:34:33] info: zh:ember:uart:ash: ======== ASH Adapter reset ========
[2026-03-20 18:34:33] info: zh:ember:uart:ash: ======== ASH starting ========
[2026-03-20 18:34:38] info: zh:ember:uart:ash: ======== ASH Adapter reset ========
[2026-03-20 18:34:38] info: zh:ember:uart:ash: ======== ASH starting ========
[2026-03-20 18:34:43] info: zh:ember:uart:ash: ======== ASH Adapter reset ========
[2026-03-20 18:34:43] info: zh:ember:uart:ash: ======== ASH starting ========
[2026-03-20 18:34:48] error: z2m: Error while starting zigbee-herdsman
[2026-03-20 18:34:48] error: z2m: Failed to start zigbee-herdsman
[2026-03-20 18:34:48] error: z2m: Check https://www.zigbee2mqtt.io/guide/installation/20_zigbee2mqtt-fails-to-start_crashes-runtime.html for possible solutions
[2026-03-20 18:34:48] error: z2m: Exiting...
[2026-03-20 18:34:48] error: z2m: Error: Failed to start EZSP layer with status=HOST_FATAL_ERROR.