Nach update heute streikt plötzlich die Integration der WP die vorher einwandfrei funktionierte mit folgenden Fehlermeldungen:
Invalid config for [modbus]: WPST_Gesamt_Jahr: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][18]. Got {'name': 'WPST_Gesamt_Jahr', 'slave': 1, 'address': 36104, 'input_type': 'input', 'unit_of_measurement': 'kWh', 'state_class': 'total_increasing', 'device_class': 'energy', 'count': 1, 'scale': 1, 'offset': 0, 'precision': 1, 'data_type': 'int16', 'scan_interval': 15}WPST_Gesamt_Monat: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][17]. Got {'name': 'WPST_Gesamt_Monat', 'slave': 1, 'address': 36103, 'input_type': 'input', 'unit_of_measurement': 'kWh', 'state_class': 'total_increasing', 'device_class': 'energy', 'count': 1, 'scale': 1, 'offset': 0, 'precision': 1, 'data_type': 'int16', 'scan_interval': 15}WPST_Gesamt_Tag: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][16]. Got {'name': 'WPST_Gesamt_Tag', 'slave': 1, 'address': 36101, 'input_type': 'input', 'unit_of_measurement': 'kWh', 'state_class': 'total_increasing', 'device_class': 'energy', 'count': 1, 'scale': 1, 'offset': 0, 'precision': 1, 'data_type': 'int16', 'scan_interval': 15}WPST_Heizen_Jahr: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][21]. Got {'name': 'WPST_Heizen_Jahr', 'slave': 1, 'address': 36204, 'input_type': 'input', 'unit_of_measurement': 'kWh', 'state_class': 'total_increasing', 'device_class': 'energy', 'count': 1, 'scale': 1, 'offset': 0, 'precision': 1, 'data_type': 'int16', 'scan_interval': 15}WPST_Heizen_Monat: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][20]........
Geht so weiter, immer der gleiche Fehler. Komplettes Protokoll s. Dateianhang. Hat jemand eine Idee?
Invalid config for [modbus]: WPST_Gesamt_Jahr: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][18]. Got {'name': 'WPST_Gesamt_Jahr', 'slave': 1, 'address': 36104, 'input_type': 'input', 'unit_of_measurement': 'kWh', 'state_class': 'total_increasing', 'device_class': 'energy', 'count': 1, 'scale': 1, 'offset': 0, 'precision': 1, 'data_type': 'int16', 'scan_interval': 15}WPST_Gesamt_Monat: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][17]. Got {'name': 'WPST_Gesamt_Monat', 'slave': 1, 'address': 36103, 'input_type': 'input', 'unit_of_measurement': 'kWh', 'state_class': 'total_increasing', 'device_class': 'energy', 'count': 1, 'scale': 1, 'offset': 0, 'precision': 1, 'data_type': 'int16', 'scan_interval': 15}WPST_Gesamt_Tag: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][16]. Got {'name': 'WPST_Gesamt_Tag', 'slave': 1, 'address': 36101, 'input_type': 'input', 'unit_of_measurement': 'kWh', 'state_class': 'total_increasing', 'device_class': 'energy', 'count': 1, 'scale': 1, 'offset': 0, 'precision': 1, 'data_type': 'int16', 'scan_interval': 15}WPST_Heizen_Jahr: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][21]. Got {'name': 'WPST_Heizen_Jahr', 'slave': 1, 'address': 36204, 'input_type': 'input', 'unit_of_measurement': 'kWh', 'state_class': 'total_increasing', 'device_class': 'energy', 'count': 1, 'scale': 1, 'offset': 0, 'precision': 1, 'data_type': 'int16', 'scan_interval': 15}WPST_Heizen_Monat: `count: 1` cannot be combined with `data_type: int16` @ data['modbus'][0]['sensors'][20]........
Geht so weiter, immer der gleiche Fehler. Komplettes Protokoll s. Dateianhang. Hat jemand eine Idee?