QTS 5.1.7.2770 build 20240520

rednag

Well-known member
QNAP adressiert mit der neuen Version einige der gemeldeten Lücken.
Da meine NAS TS-253B nicht via WAN erreichbar ist, werde ich noch etwas auf Erfahrungen warten.

Security Updates​


  • Fixed the security issues CVE-2024-21902, CVE-2024-27127, CVE-2024-27128, CVE-2024-27129, CVE-2024-27130.
  • Applied multiple security updates to further enhance system security.

Enhancement​


SAMBA​


  • When logging in via SMB, multiple login failures that occur within three seconds of each other are now recorded as a single login failure if they involve the same user account, source IP address, and computer name.

Storage & Snapshots​


  • When users try to enable encryption on a shared folder, the system now checks and alerts users if there are file names exceeding 143 characters or file paths exceeding 2048 characters.

Fixed Issues​


  • Fixed an issue where after disconnecting a virtual switch and then connecting another cable to the same LAN, the NAS could not communicate with another device through the LAN.
  • Fixed an issue where users could not connect the NAS to a Wi-Fi router if the Wi-Fi password contained certain special characters.
  • Resolved an issue where users could not configure a proxy server if they logged in with an account containing certain special characters in the username.
  • Improved the login page UI to ensure all elements are visible on the screen on different platforms and browsers.
  • Resolved an issue in QVPN Service where under certain circumstances, trying to enable any VPN service would fail and incorrectly trigger an IP conflict log message.
  • Resolved an unusual issue where users might fail to restore files from a snapshot in Storage & Snapshots if they opened the application via File Station.
  • Fixed an issue where under certain conditions if 2-step verification was enabled for the "admin" account, a system reset via the hardware reset button would fail to disable 2-step verification for the account after the reset.
  • Fixed an issue where a user account with multibyte characters in their username could not set port trunking in Network & Virtual Switch.
  • In Network & Virtual Switch, users can now specify an IP address with leading zeroes in each group of the address notation if the result represents the same address without the leading zeroes (for example, users can now specify 127.000.000.001, which is equivalent to 127.0.0.1).
  • Resolved an issue in File Station where under certain conditions a "Move" task would stop responding.
  • Improved I/O performance when accessing files via SMB by reducing the number of logs generated.
  • Fixed an issue where when logged in as a domain user on a Windows device connected to a domain controller NAS, executing a command that contained a service principal name (SPN) would fail if the SPN included spaces.
  • Fixed a rare issue where under certain circumstances users might encounter an authentication error when using Windows Server 2019 as a domain controller to access a folder on a NAS connected as a domain member.
  • Resolved an issue where a connected external storage device would fail to appear in Control Panel or Storage & Snapshots if the device's model name contained certain special characters.
  • Fixed an issue where users could not sort files in the Recycle Bin if it was opened via the desktop shortcut.
  • Fixed an issue where modifying a file via SMB could change the file creation time.
  • Resolved an issue where copying a file from a oplocks-enabled shared folder to a Windows client via SMB could interrupt an ongoing copying process of the same file to a different Windows client.
  • Fixed a typo in the "Edit Properties" window of HybridMount shared folders in Control Panel.
  • Fixed an issue where some users could not successfully import a custom root certificate for certifying the SSL certificate of a server.
  • Fixed an issue on SAS JBOD enclosures where replacing disks would fail to rebuild a degraded RAID group under certain circumstances.
  • Resolved an issue in Resource Monitor > Storage Resource > Disk Activity, where the page would display an error even though only some data was unavailable.
  • Resolved an issue where deleting NAS files via SMB could fail under certain conditions.
  • Fixed the security issue CVE-2023-38545. For details, see https://www.qnap.com/en/security-advisories/
  • Fixed an issue where the model name for certain NIC models was not correctly displayed in Network & Virtual Switch.
  • Fixed an issue where copying many files via SMB could sometimes take a longer time than expected.
  • Fixed an issue in File Station where when a video file appeared in a search result, users could not use "Play with CAYIN MediaSign Player" to play the video.
  • Resolved an issue in iSCSI & Fibre Channel where when adding or editing an iSCSI ACL policy, sorting the LUN list would cause uneditable LUNs to become editable.
  • Fixed an issue where after reinitializing the NAS with the option to shut down after reinitialization, the NAS would restart instead.
  • Resolved an issue in HybridMount folders mounted via SMB, where it would take a long time for the folder contents to appear when accessing from a computer via SMB.
  • Addressed an issue in Notification Center where when creating or editing an alert notification rule, configuring the setting "Notify me when the number of log entries generated per minute exceeds this threshold" would cause unexpected issues.
  • Fixed an issue in File Station > More > File Transfer, where deselecting the setting "Always merge all file transfer processes into one task" failed to disable the setting.

Other Changes​


Control Panel​


  • The system now checks whether a new QNAP Software Terms of Use is available before performing a firmware update. Administrators must agree to the new terms to proceed with the firmware update.

Mehr Details unter https://www.qnap.com/en/security-advisory/qsa-24-23
 
Zuletzt bearbeitet:
Ich habe nun auch auf die QTS 5.1.7.2770 build 20240520 aktualisiert,
Bisher keine Auffälligkeiten oder Bugs vernommen.
Ich finde QNAP muß in letzter Zeit weniger Rückrufe vornehmen. Fehler können ja mals passieren, aber man hat keinerlei Informationen darüber bekommen warum man was zurückziehen musste. Die würden sich eher die Zunge abbeißen.
 

Zurzeit aktive Besucher

Keine Mitglieder online.

Letzte Anleitungen

Statistik des Forums

Themen
4.796
Beiträge
48.630
Mitglieder
4.456
Neuestes Mitglied
Fahren
Zurück
Oben